Splices may be configured as a simple splice, having one conductor joined to another conductor, or as a complex splice with one or more conductors joined to one or more other conductors. In this article learn how to splice wires up to NASA standards.

ESPHome provides built-in support for the BME680 sensor with a fully open-source implementation; however, it is not compatible with all the sensor’s features. The project also includes Bosch’s proprietary BSEC v1 and v2 software libraries that support different ESP boards. Learn how to set up and configure your sensors in this post with examples for the ESP32 S2 and C3 boards.

This is an opinion article where I explain why I believe that the RP2040 chip from the Raspberry Pi Foundation just opened the door for Intel to be an important player on the SBC market. At the same time the Pi Foundation may enter other profitable businesses typically held by FTDI.

During my search for a small and cheap ESP32 board to use with ESPHome IoT projects, I stumbled upon the amazing ESP32-S2 Mini. This board is the compact and low budget option I was looking for, and while it is available on AliExpress from various sellers, there are a few details to consider.