📌 6 de Novembro, 2024

Windows: Setting VLANs from PowerShell

Informática · Windows

Settings a VLAN ID is yet another common task for network administrators, but using the Windows GUI for this is time-consuming as usual. In this article, you’ll learn how to do it quickly using PowerShell commands.

Setting the VLAN ID

Considering we’ve a network interface called Ethernet USB this is how we can get the active VLAN ID:

Get-NetAdapterAdvancedProperty "Ethernet USB" -DisplayName "VLAN ID"

Note that network interface name is the one that shows up under Control Panel > Network Connections.

To switch to VLAN ID 55 run the following command:

Set-NetAdapterAdvancedProperty "Ethernet USB" -DisplayName "VLAN ID" -DisplayValue 55

Resetting the Interface

# Remove VLAN ID
Reset-NetAdapterAdvancedProperty "Ethernet USB" -DisplayName "VLAN ID"

# Restart the interface (optional)
Disable-NetAdapter -Name "Ethernet 2" -Confirm:$false; Enable-NetAdapter -Name "Ethernet 2" -Confirm:$false

That’s it! After setting the VLAN you may want to set static IP addresses and for that you can check my last article.